|
Top |
How
many Envirotesters will I need? |
You need only one Envirotester per forced air system.
Exceptions:
1. If you are not able to use forced air and you have more than one specific location, you may want to perform a test at each location using a separate
Envirotester at each location.
2. If you find that you have an air quality issue with the presence of mold, yeast and/or bacteria in your first test, you may want to retest after you have taken corrective action. A second
Envirotester may be purchased for a retest. Keep the second unit in a cool place for up to 1 year. |
|
Top |
Does
one unit detect yeast, mold and bacteria, or do you need
one unit per spore? |
If all three types of spores are present in your forced air system, a single unit and test will show all three types. |
|
Top |
Is
one Envirotester sufficient for a 3 story home? |
You will need only one Envirotester per forced air system. |
|
Top |
Is it
possible that mold could be localized to one room or section
of the forced air system?
|
If mold is present in your forced air system, it will be detected by the Envirotester. However, if you notice that mold odor is stronger in one room than in another, you may want to perform two tests (one in each room) to determine if there is a more severe localized mold problem. |
|
Top |
How do I use the Envirotester? |
The best method is to hold the tester in front of an air duct that has forced air emerging for sixty seconds. Then store the unit in a warm place (70 to 95 degrees Fahrenheit) for 24 to 72 hours. Follow the instructions that come with the unit to compare the results to the chart and determine if you have the presence of mold, yeast or bacteria and to what degree. |
|
Top |
Where
is the Envirotester placed? |
The Envirotester is held in front of the vent where the air is blowing out for the most concentrated sample. It is very easy to do. All kits come with instructions and a results chart. |
|
Top |
How long do I have to wait to get the results? |
Results are evident after a minimum of 24 hours and within 72 hours. The ideal temperature for cultivating results is between 70 and 95 degrees Fahrenheit. Instructions are provided with each unit. |
|
Top |
Is the unit sent to a lab for analysis? |
No. You compare the results to a chart to determine the results. |
|
Top |
Do you offer quantity
discounts for contractors and other distributors? |
Contractors and other distributors my contact us at (904) 823-1928 for more information on prices. Heating and Air Conditioning companies are already benefiting by using Envirotester to confirm the presence of yeast, mold and bacteria in forced air systems. It is an excellent tool for annual checkups. |
|
Top |
Do you have additional information
on the Envirotester? |
All of the information available on the Envirotester is available on the website: www.envirotester.com. Additional volume pricing information is available by calling (904) 823-1928. |
|
Top |
Do you
have brochures available? |
Yes, we have brochures available. The most complete source of information is our website:
www.envirotester.com. |
|
Top |
Do you have sampler Envirotesters? |
No |
|
Top |
Is
this unit available in any store anywhere? |
Although
it may be in some stores in the future, currently
Envirotester
may be purchased online at
www.envirotester.com and
by phone at
800.315.8810. |
|
Top |
What does
is actually check? |
Envirotester
tests for the presence of airborne yeast, mold, and bacteria in the forced air system. |
|
Top |
Does
Envirotester detect mold in an inaccessiable area, e.g. behind
a wall. |
Envirotester
is best used to detect airborne mold, yeast and bacteria in your forced air system.
Although it is NOT strongly recommended, it may be used to detect mold in inaccessible areas, such as behind walls. The risk with this is contaminating the unit with particles from paneling, wall board, insulation and other material while putting it in place. We have tested this procedure and it does detect mold. |
|
Top |
Does Envirotester detect gas or
chemicals? |
No. Envirotester detects mold, yeast and bacteria (living organisms). It does NOT detect chemicals or gas. |
|
Top |
What is the shelf life of the
Envirotester? |
The shelf life is up to one year when kept in a cool storage
area |
